Syntax Description; Command Modes; Usage Guidelines - Cisco 32369 Manual

Command Reference
show ip dhcp database
To display Cisco IOS Dynamic Host Configuration Protocol (DHCP) Server database agent
information, use the show ip dhcp database Privileged EXEC command.
show ip dhcp database [url]

Syntax Description

url
Defaults
If a URL is not specified, all database agent records are shown. Otherwise, only information about
the specified agent is displayed.

Command Modes

Privileged EXEC

Usage Guidelines

This command first appeared in Cisco IOS Release 12.0(1)T.
Examples
The following example shows all DHCP server database agent information. Table 4 lists descriptions
for each field in the example.
Router# show ip dhcp database
URL
Read
Written
Status
Delay
Timeout
Failures
Successes
Table 4
Field
URL
46 Release 12.0(1)T
(Optional) Specifies the remote file used to store automatic DHCP
bindings. Following are the acceptable URL file formats:
• tftp://host/filename
• ftp://user:password@host/filename
• rcp://user@host/filename
: ftp://user:password@172.16.4.253/router-dhcp
: Dec 01 1997 12:01 AM
: Never
: Last read succeeded. Bindings have been loaded in RAM.
: 300 seconds
: 300 seconds
: 0
: 1
show ip dhcp database Field Descriptions
Description
Specifies the remote file used to store automatic DHCP
bindings. Following are the acceptable URL file formats:
• tftp://host/filename
• ftp://user:password@host/filename
• rcp://user@host/filename