Table of Contents
Advertisement
maintenance
ValveReplacement
Before you begin:
• Shut off the gas supply to the unit.
• Disconnect all electrical supply to the unit.
Alwayslettheappliancecooltoroomtemperaturebeforeservicing.
When the glass is cold and the appliance is lit, condensation may fog the glass. Condensation is normal and will disappear in a few minutes as the
glass heats up.
1. Remove the pilot cover (3 screws).
2. Remove the burner tray (2 screws).
66
| Gi29 Direct Vent Gas Insert
3. Slide burner tray to the left and out.
4. Disconnect remote receiver/ON/OFF switch wires from TH/TH-TP termi-
nals on gas valve.
Advertisement
Table of Contents
