Table of Contents
Advertisement
Insert and remove a
SIM card
step-by-step
LED indicators
GS25, Operation
GR10_011
Step
Description
The SIM card is inserted into a slot on the side of the SLG1-2.
Take the SIM card and a pen.
1.
Using the pen, press the small button of the SIM card slot to eject the SIM
card holder.
2.
Take the SIM card holder out off the SLG1-2.
3.
Place the SIM card into the SIM card holder, the chip facing up.
4.
Insert the SIM card holder into the SIM card slot, the chip facing the connec-
tors inside the slot.
Description
Each slot-in-device for a radio or digital cellular phones has Light Emitting Diode indi-
cators on the bottom side. They indicate the basic device status.
Diagram
a b c d
GR10_012
Description of the LEDs
IF the
on
Mode LED
SLR5 with Satel-
line M3-TR1
Data
any device
transfer
LED
1
2
is
red
off
flashing green
a) Power LED
b) Signal strength LED
c) Data transfer LED
d) Mode LED, available for Satelline 3AS
THEN
the device is in the programming
mode controlled from the PC via
cable.
data is not being transferred.
data is being transferred.
41
Advertisement
Table of Contents
