Leica Viva Series User Manual page 27

GS25, Operation
Step Description
10. To hang the instrument
on the tripod leg, use
the hook on the rear of
the unit. Or place the
instrument in the
container.
11. Insert the height hook
into the carrier.
12. Measure the antenna
height using the height
hook.
13. Clip the antenna arm to
the GNSS antenna.
14. Screw the radio antenna
onto the antenna arm.
15. GS10
Attach the radio in its
housing to port P2 or P3
on the instrument.
GS25
Insert the slot-in radio
into port P3 on the
instrument.
16. Connect the radio
antenna to the radio
using the second 1.2 m
antenna cable.
17. Press the ON/OFF
button on the instru-
ment for at least 2 s
(GS25: 3 s) to switch on
the instrument.
Insert the SD card or
CompactFlash card and
the battery into the CS
field controller.
Connect the CS field
controller to the instru-
ment if necessary.
To hang the CS field
controller on the tripod
leg, use the hook on the
hand strap. Refer to the
CS10/CS15 User Manual.
Insert the height hook
into the carrier.
Measure the antenna
height using the height
hook.
Press the ON/OFF
button on the instru-
ment for at least 2 s to
switch on the instru-
ment.
-
-
Connect the CS field
controller to the instru-
ment if necessary.
To hang the CS field
controller on the tripod
leg, use the hook on the
hand strap. Refer to the
CS10/CS15 User Manual.
Insert the height hook
into the carrier.
Measure the antenna
height using the height
hook.
Press the ON/OFF
button on the instru-
ment for at least 2 s to
switch on the instru-
ment.
-
-
-
27