Leica Viva Series User Manual page 23

Format SD card
step-by-step
Stop USB device
step-by-step
Initialize ME
step-by-step
GS25, User Interface
The different formatting options are similar. The individual steps do not differ
between the different formatting options. As an example, the following example
explains how to format an SD card.

Formatting a data storage device before storing data on it, is required if the
device is new, or if all data on the device must be deleted.

By activating the format command all data will be lost. Make sure that all
important data on the device has been backed up before formatting.
Step Description
1.
2.
3.
Step Description
1.
2.
3.
Step Description
1.
2.
3.
Enter the Tools menu, select Format SD card and press
the Enter button.
Press the Enter button again to continue with formatting
the SD card or press the Cancel button to return directly
to the Tools menu.
Once the formatting of the SD card is completed, the
GS25 GNSS instrument is rebooted and you return to the
Main Menu.
Enter the Tools menu, select Stop USB device and press
the Enter button.
The USB device connected to the GNSS instrument is
stopped. Now you can safely remove the USB device.
Press the Enter button again to return directly to the
Tools menu.
Enter the Tools menu, select Initialize ME and press the
Enter button.
Press the Enter button again to continue with initialising
the ME or press the Cancel button to return directly to
the Tools menu.
Once the initialising of the ME is completed, the GS25
GNSS instrument is rebooted and you return to the Main
Menu.
23