Led Indicators On Gs25 - Leica Viva Series User Manual

4.5
LED indicators
Description of the
LEDs
GS25, Operation

LED Indicators on GS25

Description
The GS25 GNSS instrument has Light Emitting Diode indicators. They indicate the basic
instrument status.
Diagram
a b c d
GR25_002
IF the is
Power LED off
green
yellow
red
fast flashing red
Storage LED off
green
flashing yellow
flashing red
red
Raw data off
logging LED
green
flashing green
red
RTK Rover off
LED
green
flashing green
RTK Base LED off
green
a) Power LED
b) Storage LED
c) Raw data logging LED
d) RTK Base LED
e) RTK Rover LED
f) Position LED
e f g
g) Bluetooth LED
THEN
battery is not connected, flat or GS25 is switched
off.
power is 40%- 100%.
power is 20%- 40%. The remaining time for which
enough power is available depends on the type of
survey, the temperature and the age of the
battery.
power is 5%- 20%.
power is low (<5%).
no SD card is inserted or GS25 is switched off.
SD card is inserted.
SD card is inserted but less than 10% memory
left.
SD card is inserted but less than 5% memory left.
SD card is inserted but full or SD card is unable to
read.
GS25 is not configured to log raw data.
GS25 is configured to log raw data.
raw data is being logged.
no raw data is being logged but GS25 is config-
ured to log raw data.
GS25 is in RTK base mode or GS25 is switched
off.
GS25 is in rover mode. No RTK data is being
received at the interface of the communication
device.
GS25 is in rover mode. RTK data is being received
at the interface of the communication device.
GS25 is in RTK rover mode or GS25 is switched
off.
GS25 is in RTK base mode. No RTK data is being
passed to the RX/TX interface of the communica-
tion device.
43