Supported Mibs; Snmp Traps; Configuring Snmp - ZyXEL Communications NWA Series User Manual

• Trap - Used by the agent to inform the manager of some events.

17.8.1 Supported MIBs

The Zyxel Device supports MIB II that is defined in RFC-1213 and RFC-1215. The Zyxel Device also supports
private MIBs (ZYXEL-ES-CAPWAP.MIB, ZYXEL-ES-COMMON.MIB, ZYXEL-ES-ZyXELAPMgmt.MIB, ZYXEL-ES-
PROWLAN.MIB, ZYXEL-ES-RFMGMT.MIB, ZYXEL-ES-SMI.MIB, and ZYXEL-ES-WIRELESS.MIB) to collect
information about CPU and memory usage and VPN total throughput. The focus of the MIBs is to let
administrators collect statistical data and monitor status and performance. You can download the Zyxel
Device's MIBs from www.zyxel.com.

17.8.2 SNMP Traps

The Zyxel Device will send traps to the SNMP manager when any one of the following events occurs.
Table 90 SNMP Traps
OBJECT LABEL
linkDown
linkUp
authenticationFailure

17.8.3 Configuring SNMP

To change your Zyxel Device's SNMP settings, click Configuration > System > SNMP tab. The screen
appears as shown. Use this screen to configure your SNMP settings. You can also configure user profiles
that define allowed SNMPv3 access.
Figure 137 Configuration > System > SNMP
Chapter 17 System
OBJECT ID DESCRIPTION
1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is down.
1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
1.3.6.1.6.3.1.1.5.5 This trap is sent when an SNMP request comes from non-
authenticated hosts.
NWA/WAC/WAX Series User's Guide
217