Add/Edit Wds Profile - ZyXEL Communications NWA Series User Manual

15.2.1 Add/Edit WDS Profile

This screen allows you to create a new WDS profile or edit an existing one. To access this screen, click the
Add button or select and existing profile and click the Edit button.
Figure 112 Configuration > Object > WDS Profile > Add/Edit WDS Profile
The following table describes the labels in this screen.
Table 75 Configuration > Object > WDS Profile > Add/Edit WDS Profile
LABEL
Profile Name
WDS SSID
Pre-Shared Key
OK
Cancel
Chapter 15 WDS Profile
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name.
Enter the SSID with which you want the Zyxel Device to connect to a root AP or repeater to
form a WDS.
Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
The key is used to encrypt the traffic between the APs.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
NWA/WAC/WAX Series User's Guide
181