Introduction; Chapter 1 Introduction; Overview - ZyXEL Communications NWA Series User Manual

1.1 Overview

This User's Guide covers the models listed in the following table. They can be managed in one of the
following methods: remote management through Nebula Control Center (NCC) or an AP Controller
(AC) such as the ZyWALL ATP, or local management in Standalone Mode. Each Zyxel Device runs in
standalone mode by default, but it is recommended to use NCC management if it is available for your
device.
NCC, AC or Standalone
(NebulaFlex PRO)
• NWA5123-AC HD
• WAC6103D-I
• WAC6303D-S
• WAC6502D-E
• WAC6502D-S
• WAC6503D-S
• WAC6552D-S
• WAC6553D-E
• WAC500
• WAC500H
• WAC5302D-Sv2
• WAX510D
• WAX610D
• WAX620D-6E
• WAX630S
• WAX640S-6E
• WAX650S
For more information about Access Point (AP) management, see
When two or more APs are interconnected, this network is called a Wireless Distribution System (WDS).
See Section 1.3.2 on page 24
The screens you see in the web configurator may be different depending on the Zyxel Device model
you're using.
NCC or Standalone
(NebulaFlex)
• NWA1123-ACv2
• NWA1123-AC PRO
• NWA1123-AC HD
• NWA1302-AC
• NWA110AX
• NWA210AX
• NWA220AX-6E
• NWA1123ACv3
for more information on root and repeater APs and how to set them up.
NWA/WAC/WAX Series User's Guide
13
C
H A P T E R

Introduction

AC or Standalone
• NWA5123-AC
• WAC5302D-S
Section 2.1 on page
1
30.