ZyXEL Communications NWA Series User Manual page 248

Figure 154 Maintenance > LEDs > Locator
The following table describes fields in the above screen.
Table 104 Maintenance > LED > Locator
LABEL
Turn On
Turn Off
Automatically Extinguish
After
Apply
Refresh
Chapter 21 LEDs
DESCRIPTION
Click Turn On button to activate the locator. The Locator function will show the actual
location of the Zyxel Device between several devices in the network.
Otherwise, click Turn Off to disable the locator feature.
Enter a time interval between 1 and 60 minutes to stop the locator LED from blinking.
Default is 10 minutes.
Click Apply to save changes in this screen.
Click Refresh to update the information in this screen.
NWA/WAC/WAX Series User's Guide
248