Remote Capture - ZyXEL Communications NWA Series User Manual
802.11 a/b/g/n/ac/ax access point
Hide thumbs
Also See for NWA Series:
- User manual (326 pages) ,
- Reference manual (144 pages) ,
- User manual (249 pages)
Table of Contents
Advertisement
Chapter 20 Diagnostics
Figure 150 Maintenance > Diagnostics: Debug Information Collector
20.3 Remote Capture
Use this screen to capture network traffic going through the Zyxel Device and output the captured
packets to a packet analyzer (also known as network or protocol analyzer) such as Wireshark. If the
Zyxel Device is connected to the Zyxel gateway or ZyWALL, you might need to configure the Zyxel
gateway or ZyWALL to allow remote capture on the Zyxel Device.
Not all models support wireless remote capture. See
Section 1.2 on page 14
for models that support
remote capture on wireless interfaces.
Click Maintenance > Diagnostics > Remote Capture to open the Remote Capture screen.
Figure 151 Maintenance > Diagnostics > Remote Capture
Figure 152 Maintenance > Diagnostics > Remote Capture (Zyxel Device that supports Wireless Remote
Capture)
NWA/WAC/WAX Series User's Guide
244
- Quick Links:
- Introduction
- Overview
- Standalone
- Nebula Control Center
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
