Load Balancing - ZyXEL Communications NWA Series User Manual

Each field is described in the following table.
Table 46 Configuration > Wireless > Rogue AP > Add/Edit Rogue/Friendly AP List
LABEL
MAC
Description
Role
OK
Cancel

10.4 Load Balancing

Use this screen to configure wireless network traffic load balancing between the APs on your network
(see Load Balancing on page
screen.
Figure 80 Configuration > Wireless > Load Balancing
Chapter 10 Wireless
DESCRIPTION
Enter the MAC address of the AP you want to add to the list. A MAC address is a unique
hardware identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a
hexadecimal number separated by colons.
Enter up to 60 characters for the AP's description. Spaces and underscores are allowed.
Select either Rogue AP or Friendly AP for the AP's role.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to close the window with changes unsaved.
132). Click Configuration > Wireless > Load Balancing to access this
NWA/WAC/WAX Series User's Guide
128