ZyXEL Communications NWA Series User Manual page 226

The following table describes the labels in this screen.
Table 95 Configuration > Log & Report > Log Setting > Edit System Log Setting
LABEL
E-Mail Server 1/2
Active
Mail Server
SSL/TLS Encryption
Mail Server Port
Mail Subject
Send From
Send Log To
Send Alerts To
Sending Log
Day for Sending Log
Time for Sending
Log
SMTP
Authentication
User Name
Password
Active Log and Alert
System log
Chapter 18 Log and Report
DESCRIPTION
Select this to send log messages and alerts according to the information in this section.
You specify what kinds of log messages are included in log information and what kinds of
log messages are included in alerts in the Active Log and Alert section.
Type the name or IP address of the outgoing SMTP server.
Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you
want encrypted communications between the mail server and the Zyxel Device.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
Select No to not encrypt the communications.
Enter the same port number here as is on the mail server for mail traffic.
Type the subject line for the outgoing e-mail. Select Append system name to add the
Zyxel Device's system name to the subject. Select Append date time to add the Zyxel
Device's system date and time to the subject.
Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Type the e-mail address to which the outgoing e-mail is delivered.
Type the e-mail address to which alerts are delivered.
Select how often log information is e-mailed. Choices are: When Full, Hourly and When
Full, Daily and When Full, and Weekly and When Full.
This field is available if the log is e-mailed weekly. Select the day of the week the log is e-
mailed.
This field is available if the log is e-mailed weekly or daily. Select the time of day (hours
and minutes) when the log is e-mailed. Use 24-hour notation.
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Use the System Log drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not log any information for any category for the system log or
e-mail any logs to e-mail server 1 or 2.
enable normal logs (green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the
Zyxel Device will e-mail logs to them.
enable normal logs and debug logs (yellow check mark) - create log messages, alerts,
and debugging information for all categories. The Zyxel Device does not e-mail
debugging information, even if this setting is selected.
NWA/WAC/WAX Series User's Guide
226