Chapter 16 Remote Management
16.5.1 Supported MIBs
The IAD supports MIB II, which is defined in RFC-1213 and RFC-1215. The focus
of the MIBs is to let administrators collect statistical data and monitor status and
performance.
16.5.2 SNMP Traps
The IAD will send traps to the SNMP manager when any one of the following
events occurs:
Table 61 SNMP Traps
TRAP #
0
1
16.5.3 The SNMP Screen
To change your IAD's SNMP settings, click Advanced > Remote MGMT > SNMP.
The screen appears as shown.
Figure 90 Remote Management > SNMP
190
TRAP NAME
coldStart (defined in RFC-
1215)
warmStart (defined in RFC-
1215)
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
IAD User's Guide