ZyXEL Communications NWA Series User Manual page 93

Figure 53 Monitor > Wireless > AP Information > Radio List (for Zyxel Device that supports WDS)
Figure 54 Monitor > Wireless > AP Information > Radio List (for Zyxel Device that does not support WDS)
The following table describes the labels in this screen.
Table 33 Monitor > Wireless > AP Information > Radio List
LABEL DESCRIPTION
More Information Click this to view additional information about the selected radio's wireless traffic and station
count. Information spans a 24 hour period.
Status This displays whether or not the radio is enabled.
Loading This indicates the AP's load balance status (UnderLoad or OverLoad) when load balancing is
enabled on the Zyxel Device. Otherwise, it shows - when load balancing is disabled or the
radio is in monitor mode.
MAC Address This displays the MAC address of the radio.
Radio This indicates the radio number on the Zyxel Device to which it belongs.
OP Mode This indicates the radio's operating mode. Operating modes are AP (MBSSID), MONITOR, Root
AP or Repeater.
AP/WDS Profile This indicates the AP profile name and WDS profile name to which the radio belongs.
This field is available only on the Zyxel Device that supports WDS.
Profile This indicates the AP profile name to which the radio belongs.
This field is available only on the Zyxel Device that does not support WDS.
Frequency Band This indicates the wireless frequency band currently being used by the radio.
This shows - when the radio is in monitor mode.
Channel This indicates the radio's channel ID.
Transmit Power This displays the output power of the radio.
Station This displays the number of WiFi clients connected to this radio on the Zyxel Device.
Chapter 8 Monitor
NWA/WAC/WAX Series User's Guide
93