ZyXEL Communications NWA Series User Manual page 161

Table 62 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: none (continued)
LABEL DESCRIPTION
Radius Server Secret Enter the shared secret password of the RADIUS server to be used for authentication.
Primary / Secondary Select the check box to enable user accounting through an external authentication
Accounting Server server.
Activate
Accounting Server Enter the IP address of the external accounting server in dotted decimal notation.
IP Address
Accounting Server Enter the port number of the external accounting server. The default port number is 1813.
Port
You need not change this value unless your network administrator instructs you to do so
with additional information.
Accounting Share Enter a password (up to 128 alphanumeric characters) as the key to be shared between
Secret
the external accounting server and the Zyxel Device. The key must be the same on the
external accounting server and your Zyxel Device. The key is not sent over the network.
Accounting Interim This field is available only when you enable user accounting through an external
Update authentication server.
Select this to have the Zyxel Device send subscriber status updates to the accounting
server at the interval you specify.
Interim Update Specify the time interval for how often the Zyxel Device is to send a subscriber status
Interval
update to the accounting server.
General Server Settings
NAS IP Address If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
IP address attribute, enter it here.
NAS Identifier If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
identifier attribute, enter it here. The NAS identifier is to identify the source of access
request. It could be the NAS's fully qualified domain name.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Figure 99 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: enhanced-open
Chapter 13 AP Profile
NWA/WAC/WAX Series User's Guide
161