ZyXEL Communications NWA Series User Manual page 63

Figure 30 Login Page in Standalone Mode
Enter the user name (default: "admin") and password (default: "1234").
4
Note: If the Zyxel Device is being managed or has been managed by the NCC, check Local
credentials in the NCC's Site-Wide > Configure > General settings screen for the Zyxel
Device's current password.
Select the language you prefer for the Web Configurator. Click Login.
5
The wizard screen opens when the Zyxel Device is accessed for the first time or when you reset the Zyxel
6
Device to its default factory settings.
If you logged in using the default user name and password, the Update Admin Info screen appears.
7
Otherwise, the dashboard appears.
Note: In some firmware versions, it is not mandatory to change the default password.
However, it is highly recommended that you change the default password after the first
login.
Chapter 4 Web Configurator
NWA/WAC/WAX Series User's Guide
63