Security List - ZyXEL Communications NWA Series User Manual

Table 60 Configuration > Object > AP Profile > SSID > SSID List > Add/Edit SSID Profile (continued)
LABEL
Enable U-APSD
Enable Proxy ARP
802.11k/v Assisted
Roaming
Schedule SSID
OK
Cancel

13.4 Security List

This screen allows you to manage wireless security configurations that can be used by your SSIDs.
Wireless security is implemented strictly between the AP broadcasting the SSID and the stations that are
connected to it.
To access this screen click Configuration > Object > AP Profile > SSID > Security List.
Note: You can have a maximum of 32 security profiles on the Zyxel Device.
Figure 98 Configuration > Object > AP Profile > SSID > Security List
The following table describes the labels in this screen.
Table 61 Configuration > Object > AP Profile > SSID > Security List
LABEL
Add
Edit
Chapter 13 AP Profile
DESCRIPTION
Select this option to enable Unscheduled Automatic Power Save Delivery (U-APSD), which is
also known as WMM-Power Save. This helps increase battery life for battery-powered WiFi
clients connected to the Zyxel Device using this SSID profile.
The Address Resolution Protocol (ARP) is a protocol for mapping an IP address to a MAC
address. An ARP broadcast is sent to all devices in the same Ethernet network to request the
MAC address of a target IP address.
Select this option to allow the Zyxel Device to answer ARP requests for an IP address on behalf
of a client associated with this SSID. This can reduce broadcast traffic and improve network
performance.
Select this option to enable IEEE 802.11k/v assisted roaming on the Zyxel Device. When the
connected clients request 802.11k neighbor lists, the Zyxel Device will response with a list of
neighbor APs that can be candidates for roaming.
Select this option and set whether the SSID is enabled or disabled on each day of the week.
You also need to select the hour and minute (in 24-hour format) to specify the time period of
each day during which the SSID is enabled/enabled.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new security profile.
This button is not available after you configure the Zyxel Device using the wizard.
Click this to edit the selected security profile.
NWA/WAC/WAX Series User's Guide
159