Introduction; Chapter 1 Introduction; Overview; Management - ZyXEL Communications NAP Series User Manual

1.1 Overview

This User's Guide covers the following models: NAP102, NAP203, NAP303 and NAP353. Your NAP is a
wireless AP (Access Point). It extends the range of your existing wired network without additional wiring,
providing easy network access to mobile users.
Table 1 NAP Series Comparison Table
FEATURES
One Ethernet LAN Port
One PoE Enabled Uplink Port
External Antennas
One DC Power Socket

1.1.1 Management

The NAP is managed and provisioned automatically by the
connected to the Internet and has been registered to a site and organization. If you are having
problems with accessing the Internet and the NCC, you may need to change the NAP's VLAN setting or
manually set its IP address through its built-in web-based configuration tool (web configurator).
You can use the Zyxel ZON utility, or check the connected gateway for the NAP's current LAN IP address.
Alternatively, disconnect the gateway or disable its DHCP server function, connect your computer to
the NAP's LAN/Ethernet port and use the NAP's default static LAN IP address (192.168.1.2) to access the
web configurator. Make sure your computer's IP address is in the same subnet as the NAP's IP address.

Introduction

NAP102 NAP203
No Yes
Yes Yes
No No
Yes No
NAP Series User's Guide
7
C
H A P T E R
NAP303 NAP353
Yes
Yes
No
Yes
NCC (Nebula Control Center)
1
No
Yes
Yes
No
when it is