Cisco SCE 2000 Platform SCE 2000 4/8xFE Installation And Configuration Manual page 118

Troubleshooting Tools
Step 2 The system asks Are you sure?
Step 3 Type Y and press Enter.
The SCE 2000# prompt appears.
Viewing the User Log Counters
There are two types of log counters:
• User log counters — count the number of system events logged from the SCE platform last
reboot.
Non-volatile counters — are not cleared during boot time
•
To view the user log counters for the current session, use the following command:
From the SCE 2000# prompt, type show logger device user-file-log counters
and press Enter.
The logger lines information appears, followed by the SCE 2000# prompt.
To view the non-volatile logger counters for both the User log file and the debug log file, use the
following command:
From the SCE 2000# prompt, type show logger nv-counters and press Enter.
The non-volatile log counter information appears, followed by the SCE 2000# prompt.
To view the non-volatile counter for the user-file-log only, use the following command:
From the SCE 2000# prompt, type show logger device user-file-log nv-
counters and press Enter.
The user-file-log non-volatile log counter information appears, followed by the SCE 2000#
prompt.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide
8-6
Chapter 8 Troubleshooting
OL-7826-05