Loading And Activating A Service Control Application - Cisco SCE 2000 Platform SCE 2000 4/8xFE Installation And Configuration Manual

Chapter 6 Cabling the Line Ports and Completing the Installation
To view the current link mode, use the following command:
From the SCE 2000
Enter
To view the current link mappings, use the following command:
From the SCE 2000
connected-links and press

Loading and Activating a Service Control Application

The SCE 2000 platform provides the basic functionalities of Service Control analysis and
enforcement. A Service Control solution requires that a Service Control application be loaded into
the platform, to take advantage of the unique SCE platform capabilities.
Loading and activating an application includes the following stages:
•
•
•
The detailed procedure of how to perform these operations is not specified and described in this
manual. For further details, refer to the following documentation:
•
•
OL-7826-05
prompt, type show interface linecard 0 link mode and press
#
.
prompt, type show interface linecard 0 physically-
#
Downloading the application provided as an SLI file to the SCE 2000 disk.
Activating the application.
Configuring the application.
Service Control Application for Broadband User Guide
Service Control Application for Broadband Reference Guide
Loading and Activating a Service Control Application
.
Enter
Cisco SCE 2000 4/8xFE Installation and Configuration Guide
6-13