Replacing The Battery - Cisco SCE 2000 Platform SCE 2000 4/8xFE Installation And Configuration Manual

Replacing the Battery

Replacing the Battery

The SCE 2000 has a lithium battery on its main circuit board. When the battery loses its charge,
call Cisco Technical Support to replace the battery.
Do not attempt to replace this battery yourself
Warning
There is danger of explosion if the lithium battery is incorrectly replaced. Replace only with the same
Warning
or equivalent type recommended by the manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide
4-22
Chapter 4 Installation and Maintenance
OL-7826-05