Changing The Pilot Bushing - Husqvarna FE 250 EU 2014 Repair Manual

SHOCK ABSORBER, SWINGARM
9
9.17
Chan
-
Remove centering disk
-
Remove seal ring
201406-10
-
Remove washer
-
Remove washer @.
-
Remove dust boot.
201407-10
ilot bushin
Preparatory work
-
Remove the spring.
-
Disassemble the damper.
-
Disassemble the piston rod.
-
Disassemble the seal ring retainer.
Main work
-
Press pilot bushing
I
Press drift (T1504)
-
Slide the new pilot bushing
I
Press drift (T1504)
Position the pilot bushing in the seal ring retainer using the special tool.
I
Press drift (T1504)
-
Support seal ring retainer
bushing all the way in.
I
Assembly tool (T150S)
-
Lubricate the special tool.
Shock absorber fluid (SAE 2.5) (50180751 S1)
Calibration pin (T1205)
-
Support seal ring retainer
I
Assembly tool (T150S)
-
Press the special tool through the new pilot bushing.
I
Calibration pin (T1205)
200798-10
✓ The pilot bushing is calibrated.
Finishing work
-
Assemble the seal ring retainer.
8.
0.
0.
(D
for seal ring
(a p. 48)
(a p. 48)
(a p. 49)
(a p. 50)
O
out of seal ring retainer
(a p. 277)
O
onto the special tool.
(l!t!J p. 277)
(!!:! p. 277)
8
with sleeve f) of the special tool. Press the pilot
(0 p. 277)
(I!;! p. 274)
8
with sleeve f) of the special tool.
(l!t!J p. 277)
(!!:! p. 27 4)
(a p. 54)
8
with the special tool.
(a p. 262)
51