Husqvarna FE 250 EU 2014 Repair Manual page 176

ENGINE
18
18.5.2 Installing the transmission shafts
18.5.3 Installing the shift forks
0-
18.5.4 Installing the shift drum
-
Oil the bearing.
-
Slide both transmission shafts
-
Mount lock ring @ .
O
-
Shift fork
main shaft.
-
Mount shift fork @ in the lower shift groove of the countershaft.
-8
-
Mount shift fork
-
Slide on shift rollers
-8
Tip
Fix the shift rollers in the shift forks with grease.
-
Push shift drum
Put shift forks @ in the shift drum.
Info
Do not misplace the shift rollers.
O
into the bearing seats together.
has a smaller inside diameter; mount this in the shift groove of the
fD
in the upper shift groove of the countershaft.
8.
O
into the bearing seat.
174