Checking The Shift Mechanism - Husqvarna FE 250 EU 2014 Repair Manual

ENGINE
18
18.4.35

Checking the shift mechanism

•
O
-
Check shift forks on disc
If there is damage or wear:
-
Change the shift fork.
@)
-
Check shift grooves
If the shift groove is worn:
-
Change the shift drum.
-
Check the seating of the shift drum in the grooved ball bearings
If the shift drum is not correctly seated:
-
Change the shift drum and/or the grooved ball bearing.
-
Check grooved ball bearing
If the grooved ball bearings are stiff or worn:
-
Change the grooved ball bearing.
-
Check the shift rollers for damage and wear.
If there is damage or wear:
-
Change the shift rollers.
-
Check the springs of shift rails
If the spring is damaged or worn:
-
Change the spring of the shift rail.
8
-
Check the shift rails for run-out on a flat surface.
If there is run-out:
-
Change the shift rail.
-
Check the shift rails for scoring, wear and smooth operation in the shift forks.
If scoring or wear is present or of the shift fork is stiff:
-
Change the shift rail.
0
-
Check sliding plate for wear on contact areas
If the sliding plate is worn:
-
Change the sliding plate.
ti)
-
Check return surface
If there is severe grooving:
-
Change the sliding plate.
-
Check guide bolts @ for firm seating and wear.
If the guide bolts are loose or worn:
� ,
6)
for damage and wear (visual check).
of shift drum @ for wear.
@)
for smooth operation and wear.
8
for damage and wear.
0.
on the sliding plate for wear.
306554-10
@).
168