Checking The Swingarm; Removing The Swingarm - Husqvarna FE 250 EU 2014 Repair Manual

SHOCK ABSORBER, SWINGARM
9
9.27

Checking the swingarm

9.28

Removing the swingarm

-
Tighten screw
Guideline
I
Screw, shock absorber adjusting ring
201370-11
-
Check the swingarm for damage, cracking, and deformation.
If the swingarm shows signs of damage, cracking, or deformation:
-
Change the swingarm.
•
I
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the rear wheel.
Main work
-
Take the brake line out of the guide.
-
Push the brake caliper forward, remove it, and hang it to the side.
Info
Cover the components to protect them against damage.
-
Remove screws
-
Remove the engine sprocket cover.
0.
I
M5
Info
Always change a damaged swingarm. Repair of the swingarm is
not authorized by Husqvarna M otorcycles.
(0 p. 11)
(� p. 93)
O
@.
and
62
I 5 Nm (3.7 lbf ft)