Cisco Network Device 2800 Introduction Manual page 75

Cable Connection Procedures for Cisco 2800
Series Routers
This document describes how to connect your Cisco 2800 series integrated services router to a power
source and to networks and external devices. It includes the following sections:
Power Connections, page 2
•
• Connecting WAN, LAN, and Voice Cables, page 9
Connecting to a Console Terminal or Modem, page 12
•
To see translations of the warnings that appear in this publication, refer to the
Note
Cisco 3800 Series Integrated Services Routers Regulatory Compliance and Safety Information
that accompanied this device.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco 2800 Series and
document