Cisco Network Device 2800 Introduction Manual page 178

Replacing the Power Supply
Figure 50
.
1
2
Install the bezel onto the front of the chassis as follows:
Step 6
a.
b.
If you are finished installing modules, install the cover on the router. See the
Step 7
Cover" section on page
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
50
Connecting an ILP Cable in Cisco 2821 and Cisco 2851 Routers
3
3
ILP cable connector, motherboard
ILP cable connector, power supply
Engage the plastic tabs of the bezel into the slots in the chassis.
Slide the bezel until it is centered and tight against the chassis.
51.
3
1
3
3
3 ILP cable guides
"Installing the Chassis
2
OL-5792-04