Cisco Network Device 2800 Introduction Manual page 142

Installing and Removing DRAM DIMMs
Figure 13
1
Place the DIMM in an antistatic bag to protect it from ESD damage.
Step 3
Installing a DRAM DIMM in a Cisco 2801 Router
To install a DRAM DIMM in a Cisco 2801 router, follow these steps:
Locate the DIMM socket on the motherboard.
Step 1
Remove any existing DIMM by gently pulling the spring-loaded clips on the end of the socket far enough
Step 2
to clear the DIMM, and gently pulling the DIMM up and away from the socket. See
Figure 14
2
Insert the DIMM into the DIMM socket, as shown in
Step 3
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
14
Removing a DRAM DIMM
1
Release the latches
Removing a DIMM
2
2
Remove the DRAM DIMM
1
Figure 15.
1
Figure 14.
OL-5792-04