Cisco Network Device 2800 Introduction Manual page 73

Figure 20
A= ACT
S= SPE
A ED
FE 0/1
F
S
L
PVD M2
PVD M1
PVD M0
Figure 21
A= ACT
S= SPE
A ED
FE 0/1
F
S
L
PVD M2
PVD M1
PVD M0
After the router has been installed and properly grounded, you can connect the power wiring; the WAN,
LAN, and voice cables; and the cables for administrative access as required for your installation. For
information about connecting the cables, see the
Routers" online document.
This document is to be used in conjunction with the
CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a
service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco
Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, GigaStack, HomeLink, Internet
Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX,
Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise, The Fastest Way to
Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other
countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (0612R)
© 2005 Cisco Systems, Inc. All rights reserved.
Printed in the USA on recycled paper containing 10% postconsumer waste.
OL-5786-03
NEBS-Compliant Chassis Ground Connection on Cisco 2821 or Cisco 2851 Chassis
A= FDX
A= LIN K
FE 0/0
A
F
S
L
AIM 1
AIM 0
Chassis Ground Connection Using Ring Terminal on Cisco 2821 or Cisco 2851 Chassis
A= FDX
A= LIN K
FE 0/0
A
F
S
L
AIM 1
AIM 0
Ground lug
Ring terminal
attachment
"Cable Connection Procedures for Cisco 2800 Series
Cisco 2800 Series Integrated Services Routers Quick Start
Chassis Installation Procedures for Cisco 2800 Series Routers
Installing the Chassis Ground Connection
Guide.
15