Cisco 2800 Series Quick Start Manual

Cisco 2800 Series Quick Start Manual

Cabling and setup
Hide thumbs Also See for 2800 Series:

Advertisement

Quick Links

Cisco 800 Series Router Cabling and Setup

Quick Start Guide

This document describes the basic process of cabling and configuring the Internet access device, the
Cisco 800 series router. For advanced cabling information, refer to the Cisco 800 Series Router Hardware
Installation Guide. For advanced configuration information, refer to the Cisco 800 Series Router Software
Configuration Guide. These documents are available on the Cisco Documentation CD-ROM and on the
World Wide Web.
You can access the most current Cisco documentation on the World Wide Web at the following sites:
http://www.cisco.com
http://www-china.cisco.com
http://www-europe.cisco.com

Parts List

The shipment of your Cisco 800 series router includes the following items:
One Cisco 800 series router
One yellow Ethernet cable
One orange ISDN S/T cable (Cisco 801 and Cisco 803 only)
One red ISDN U cable (Cisco 802 and Cisco 804 only)
One RJ-45-to-RJ-11 adapter cable (for use with the red ISDN U cable)
One blue console cable
One DB-9-to-RJ-45 adapter (for use with the blue console cable)
One DB-25-to-RJ-45 adapter (for use with the blue console cable)
One black power supply
One black power supply cord
800 and SOHO Series Product Documentation CD
Cisco 800 Fast Step CD-ROM
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2001. Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Summary of Contents for Cisco 2800 Series

  • Page 1: Quick Start Guide

    One black power supply cord 800 and SOHO Series Product Documentation CD • • Cisco 800 Fast Step CD-ROM Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2001. Cisco Systems, Inc. All rights reserved.
  • Page 2 Verify the PC Setup Figure 1 shows the items included with the router. If any of the items is missing or damaged, contact your customer service representative. Figure 1 Items Included with the Router Yellow Ethernet cable Orange ISDN S/T cable (Cisco 801 and Cisco 803) Red ISDN U cable (Cisco 802 and Cisco 804)
  • Page 3: Connect The Cisco 800 Series Router To A Pc

    Connect the Cisco 800 Series Router to a PC Follow these steps to connect the Cisco 800 series router to a PC: Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 and 802 routers) or from the yellow Ethernet port with the number 0 (Cisco 803 and 804 routers) on the back panel of the router to the Ethernet port on the NIC on the computer.
  • Page 4: Connect The Cisco 800 Series Router To A Hub

    Connect the Cisco 800 Series Router to a Hub Connect the Cisco 800 Series Router to a Hub Follow these steps to connect the Cisco 800 series router to a hub: Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 and 802 routers) or from the yellow Ethernet port with the number 0 (Cisco 803 and 804 routers) on the back panel of the router to the Ethernet port on the hub.
  • Page 5: Connect An Isdn Line

    Connect an ISDN Line Refer to the section corresponding to your router model and follow the steps to connect the Cisco 800 series router to an ISDN line. Option A—Connecting Cisco 801 and Cisco 803 Routers • Option B—Connecting Cisco 802 and Cisco 804 Routers •...
  • Page 6 Connect Telephone, Fax Machine, or Modem Option B—Connecting Cisco 802 and Cisco 804 Routers Figure 5 Connecting an 802 or 804 Router to an ISDN Line HU B NO HU B ET HE RN ET 10 BA SE T Cisco 804 router Connect the red cable to the red ISDN U port.
  • Page 7: Connect The Power And Turn On The Router

    Figure 6 Connecting an 800 Series Router to a Telephone HU B NO HU B ET HE RN ET 10 BA SE T Cisco 804 router Step 1 Connect one end of the telephone cable to the gray PHONE 1 or PHONE 2 port. If you are connecting only one device, use the PHONE 1 port.
  • Page 8: Verifying The Leds

    Verifying the LEDs Make sure the router power is off. Press the power switch to standby ( Step 1 Connect the power supply cable to the 8-pin connector on the router. Step 2 Connect the power cord to the desktop power supply. Step 3 Connect the other end of the power cord to an electrical outlet.
  • Page 9: System Requirements

    About the Product CD The 800 and SOHO Series Product Documentation CD contains the technical publications for the 800 and SOHO series routers. System Requirements Processor PC OS Memory Drives Monitor Software Documentation Exceptions This CD does not contain certain publications that were incomplete or unavailable when this CD was produced.
  • Page 10: Printing Documents

    Select a book title from the document list on the left or from the document drop-down menu on the • CD title bar. Click the Cisco Systems corporate icon to display Cisco support and service information. • Click About This CD (notepad icon) to get additional information about this CD.
  • Page 11 SlideCast, SMARTnet, TransPath, Unity, Voice LAN, Wavelength Router, and WebViewer are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That’s Possible, and Empowering the Internet Generation, are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, Cisco, the Cisco...
  • Page 12 About the Product CD Ordering Printed Copies of Documents 78-5374-03...

This manual is also suitable for:

800 series

Table of Contents

Save PDF