Heating And Ventilation; Steering Wheel Console - Kärcher MC 130 Manual

5.9

Heating and ventilation

The fresh air is drawn in through a dust filter or a fine dust
filter (filter class F8 optionally available) at the side of the
B-pillar of the driver cabin.
1 Temperature regulator of heater
2 Switch for air conditioning
Note
The switch is present with all versions, the air condition-
ing function is optional
3 Fan blower
5.9.1 Circulating air mode
The circulating air mode function ensures faster clearance
of the windscreen when the air conditioning system or the
fan blower is switched on. The air in the cabin can also be
warmed faster. Can also be used in case of bad odours
from the outside.
1 Lever for circulating air mode
2 Air nozzle
Press to open
Circulating air mode: Pull the lever to the front.

Caution: Use this function for a limited time only, as
there is no air exchange from the outside in this mode.
64

5.10 Steering wheel console

1 Steering wheel
2 Multiswitch
3 Display with function keys
5.10.1 Multiswitch steering wheel
The multiswitch is located on the left underneath the steer-
ing wheel.
1 Wiper
Position J: Intermittent operation
Position 0: Off
Position I: Normal
Position II: Fast
2 Windshield wiper fluid
Push to operate
3 Horn
Push to operate
4 Right indicator
5 Left indicator
The multiswitch simultaneously serves for switching on the
high beam, in order to do so, push the multiswitch towards
the front. Pull to switch it off.
12
-
EN