PROBLEM
10. You have forgotten your PIN.
11. You cannot move the channels.
12. The receiver turns itself off.
13. When turning the device on after
standby, the receive takes a long
time to boot up.
WARNING
Generally, in the event of abnormal behavior of the receiver, a factory reset (par. 5.6) and/or a system reboot (power off >
power on) can help solve your problem.
POSSIBLE CAUSES
The LCN function is active.
The automatic shutdown is activated.
Power Saving is activated.
TS ULTRA 4K
WHAT TO DO
Do a factory reset (par. 5.6) and define
a new PIN during installation
You need to do factory reset (par. 5.6):
LCN editable only during the setup
wizard (chap. 3).
Refer to paragraph 5.7.
Refer to paragraph 5.7.
19