Tele System TS ULTRA 4K User Manual page 32

TELE System
2.3 Remote control
A good knowledge of the remote control is the basis for being able to navigate through the various menus. The key
functions are simple and intuitive.
In addition to the remote control receiver in question (press the STB button) after an appropriate programming of the TV
button (paragraph 0), the remote control also allows you to control the connected TV
2.3.1 Batteries
Information and warnings
Replace or install batteries upon the first use of the product or when the remote control does not appropriately respond
to key presses. Compatible batteries: 2 x AAA, 1.5V.
To prevent that the leakage of corrosive liquid that may damage the remote control, it is advisable to remove the
batteries when the device is not used for a long period.
Avoid the use of different types of batteries or dead and new batteries simultaneously.
Insertion and removal
Once you open the battery door located on the back of the remote, insert the 2 batteries (AAA) according to the correct
polarity as indicated inside the compartment and then close the lid.
Remove the old batteries, which must be disposed of separately from household waste taking them to any store or
collection center, then repeat the same operations of insertion.
2.3.2 Remote control buttons
1. POWER q Turn on (On) and turn off (Standby).
NOTE
When powered from the standby state, the receiver may have different reaction
times. Please refer to paragraph 5.7 regarding power saving.
2. LED LED indicator for button functioning on the remote.
3. TV Enabling of the television command.
4. STB Enabling of the decoder command (Set Top Box - STB).
5. SOURCE Audio-video source selection for TV Selezione.
6. 0÷9 Alphanumeric keys Channel change or the input of alphanumeric values.
7. EPG Electronic Programming Guide (EPG).
8. INFO Information on the viewed program.
9. VOL +/VOL- Regulate audio volume level.
10. DTT/SAT Switch between terrestrial and satellite channels receiver
11. (Mute) Audio mute.
12. PROG +/PROG- Change next / previous channel.
13. MENU Main menu.
14. OPT (Option) Activation of some functions in the menu.
15. BACK Return to the previous channel or the lower level of the menu.
16. EXIT Menu output, EPG, teletext and other functions or active windows.
17. ▲ ▼ ◄ ► (cursor arrows) To navigate through the menu items and options.
18. OK/List Confirm actions / changes or switched to the channel list.
19. RED, GREEN, YELLO, BLUE(Colored buttons) They have different functions, and
are used in the service menu and teletext.
20. AUDIO Available audio tracks.
21. SUB Subtitles. (**)
22. TEXT Teletext.
(**)
23. PIP Picture-in-Picture function (PIP).
24. FILE Access to multimedia files in a USB memory connected to the receiver
25. 4 REC No function associated with this button.
26. 2d PLAY/PAUSE, 3 STOP, , 7 PREV, 5 REW, 6 FWD, 8 NEXT Function keys for
media playback.
(*)
In order to be able to control your TV, the TV button must be properly programmed as described
in par. 0.
(**)
Program information, subtitles, teletext and additional audio tracks are optional data provided
by the broadcaster of the tuned channel; this information may be incomplete or absent.
4
(*)
(**)
(**)
(**)
(*)