Input/Output Ports And Connectors - Cisco Wide Area Application Engine 612 Hardware Installation Manual

Hardware Features

Input/Output Ports and Connectors

Warning
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
1-10
Your WAE appliance supports the following I/O connectors on the back of the
device:
Ethernet connectors
•
• Serial connector
Video and audio connectors (on optional adapter)
•
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits
to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits,
and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45
connectors. Use caution when connecting cables. Statement 1021
Figure 1-7 shows the location of the WAE back panel connectors and receptacles.
Figure 1-7 WAE-512 and WAE-612 Back Panel Connectors and Receptacles
1
1
AC power receptacle
3 Keyboard connector
5 Monitor connector
7
Ethernet 1 port connector
9 USB 2 port (not supported)
1. Not required for normal operation. Can be used for troubleshooting purposes.
Chapter 1 Introducing the Cisco Wide Area Application Engine
8 6
9 7
2
Mouse connector
1
4 Serial port
1
6 Ethernet 2 port connector
8
2
5 4 3
1
USB 1 port (not supported)
OL-9137-02