Cisco Wide Area Application Engine 612 Hardware Installation Manual page 51

Chapter 2 Preparing to Install the Cisco Wide Area Application Engine
•
•
•
•
•
OL-9137-02
Do not extend more than one device out of the rack at the same time.
Remove the rack doors and side panels to provide easier access during
installation.
Connect the device to a properly grounded outlet.
Do not overload the power outlet when installing multiple devices in the rack.
Do not place any object weighing more than 110 lb (50 kg) on top of
rack-mounted devices.
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
Safety Guidelines
2-7