Cisco Wide Area Application Engine 612 Hardware Installation Manual page 81

Chapter 4 Installing Hardware Options
Figure 4-7
1
1
Close the drive tray handle.
Step 6
Reload the appliance.
Step 7
Check the hard disk drive status LED to make sure that the hard disk drive is
Step 8
operating correctly. If the amber hard disk drive status LED for a drive is lit
continuously, that drive is faulty and needs to be replaced. If the green hard disk
drive activity LED is flashing, the drive is being accessed.
OL-9137-02
Installing a SAS Hard Disk in the WAE-612—Disk01 is Shown
2
Drive handle (in open position)
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
Working with Hard Disk Drives
2 SAS drive and tray assembly
4-13