Cisco Wide Area Application Engine 612 Hardware Installation Manual page 62

Installing the Cisco Wide Area Application Engine
Figure 3-8
1
Attach the power cords and the Ethernet cables to the rear of the device.
Step 8
cables to the left corner of the chassis (as viewed from the rear) and use the cable
straps to secure the cables to the slide rails. (See
Figure 3-9
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
3-10
Removing the Shipping Bracket
Release tab
Securing the Cables
Chapter 3 Installing the Cisco Wide Area Application Engine
1
Figure
Route the
3-9.)
OL-9137-02