Cisco Wide Area Application Engine 612 Hardware Installation Manual page 61

Chapter 3 Installing the Cisco Wide Area Application Engine
Figure 3-7
1
To remove the shipping bracket, press on the release tab
Step 7
indicated on the shipping bracket, and remove the shipping bracket from the slide rail.
Repeat this step for the other shipping bracket. Store the shipping brackets for future
use.
Note
OL-9137-02
Inserting the Chassis onto the Slide Rails
2
Captive thumbscrews
You must reinstall the shipping brackets on the slide rails before you transport
the rack with the chassis installed. To reinstall the shipping brackets, reverse
this step.
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
Installing the Cisco Wide Area Application Engine
1
2
Shipping brackets
(labeled 1 in Figure 3-8) as
3-9