Front Panel Control Buttons; Led Indicators - Cisco Wide Area Application Engine 612 Hardware Installation Manual

Chapter 1 Introducing the Cisco Wide Area Application Engine

Front Panel Control Buttons

Figure 1-4 Front Panel Control Buttons
1 2
3
1
Power control button
3
CD eject button
Table 1-1 Front Panel Control Buttons
Item
Power control button
Reset button
CD eject button

LED Indicators

OL-9137-02
Figure 1-4 shows the WAE front panel, and
control buttons.
Description
Powers up the device. You might need to use a pen or the end of a
straightened paper clip to press the button.
Resets the device and runs the power-on self-test (POST). You might need
to use a pen or the end of a straightened paper clip to press the button.
This is a hardware reset button and does not restore the device to the
Note
factory default software settings.
Opens the CD drive tray.
Figure 1-5 shows the location of front panel LEDs, and
their function.
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
Table 1-1
2
Reset button
Hardware Features
describes the front panel
Table 1-2 describes
1-7