Cisco Wide Area Application Engine 612 Hardware Installation Manual page 86

Appliance Specifications
Table A-1 Appliance Features and Specifications
Specification
Microprocessor
Memory
Expansion bays
Expansion slots
Hard disk controllers
Hard disk drives
Adapters
Power supply
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
A-2
Description
• WAE-512—One Intel Pentium 4, 3.0-GHz processor 531, 800-MHz
1
FSB , 1-MB level-2 cache
WAE-612—One Intel Pentium D Smithfield 3.0 GHz, Dual Core,
•
800-MHz FSB, 2-MB level-2 cache
WAE-512—One, two, or four 1-GB RoHS compliant SDRAM
•
RDIMMs
The system comes with one 1-GB RDIMM. You have the option to add
one or three additional 1-GB memory modules.
WAE-612—Two or four 1-GB RoHS compliant SDRAM RDIMMs
•
The system comes with two 1-GB RDIMMs. You have the option to add
two additional 1-GB memory modules.
Two 3.5-in. (8.89-cm) slim-height bays for hard disk drives
Two 64-bit, 100 MHz PCI-X half-length slots (1 low profile, 1 full profile)
WAE-512—Serial ATA (SATA) controller with integrated RAID
•
(simple swap)
WAE-612—Serial-attached SCSI (SAS) controller with integrated
•
RAID (hot swap)
WAE-512—One or two 80-GB or 250-GB simple-swap serial advanced
•
technology attachment (SATA) hard disk drives. Drive-type mixing is
not allowed.
WAE-612—Two 146-GB or 300-GB serial attached SCSI (SAS).
•
Drive-type mixing is not allowed.
1-port Fibre Channel adapter
•
1-port MPEG A/V decoder adapter
•
4-port Ethernet inline network adapter
•
The WAE-512 and WAE-612 support full-height
Note
three-quarter-length adapter cards in PCI slot 1.
1 AC-input
Appendix A Technical Specifications
OL-9137-02