The Transmitter Controls In Detail - Multiplex PROFI CAR 403 Operating Instructions Manual

The transmitter controls in detail

The three pictures below illustrate the essential controls.
The menu buttons
The trigger duster
Trigger loop
adjustment screw
DA
Digi Adjustor
HB
Handle Button
The trim rockers
Initial throttle
Lock point
rear brake
(throttle/brake servo)
Repeat function
All trim rockers have an automatic repeat function when held pressed for longer than
about 1 second.
Special case – TRUCK:
If you wish to control a truck with your Profi Car, you have 5 auxiliary channels
available (see 8: Driving trucks). In this mode only the steering trim (rocker A) is
active; all the other rockers are used to control the auxiliary channels.
Steering
7
The „key"
to the menus
Everything to hand
DA HB
The
„tuning centre"
Switched channel or
lock point front brake
nd
(2 brake servo)