Replacing the Chassis Cover
Insert the new DIMM by sliding the end with the metal fingers into the DIMM socket, as shown in
Step 8
Figure
Figure A-5
Snap the latches into place. Do not use excessive force, because the socket might break.
Step 9
Replace the gateway chassis cover. (See the
Step 10
Power on the universal gateway. If error messages relating to memory are displayed, remove the DIMM
Step 11
and reinstall it, taking care to seat the DIMM firmly in its socket.
Replacing the Chassis Cover
This section describes the procedure for replacing the chassis cover.
Required Tools and Equipment
•
•
Cisco AS5350XM Universal Gateway Chassis Installation Guide
A-8
A-5.
Inserting the New DIMM into the Socket
Medium Phillips screwdriver
Five screws
Appendix A
"Replacing the Chassis Cover" section on page
Replacing Memory Components
A-8.)
OL-6417-02