Chassis Cover Replacement - Cisco AS5350XM Installation Manual

Appendix A Replacing Memory Components

Chassis Cover Replacement

To replace the chassis cover, follow this procedure:
Step 1 Place the chassis bottom so that the front panel is facing you. (See
Figure A-6
Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
Step 2
the top rear of the chassis.
Lower the front of the top cover to close the chassis, and ensure the following:
Step 3
•
•
•
When the chassis cover is properly assembled, no tabs are visible. (See
OL-6417-02
Replacing the Chassis Cover
Chassis cover
3
Front panel
The chassis cover tabs fit under the edge of the chassis rear panel so that they are not exposed.
The chassis tabs fit under the chassis cover so that they are not exposed.
The chassis cover side tabs on both sides fit inside the chassis side panels so that they are not
exposed.
Chassis bottom
Cisco AS5350XM Universal Gateway Chassis Installation Guide
Replacing the Chassis Cover
Figure A-6.)
Figure A-7.)
A-9