Cisco AS5350XM Installation Manual page 40

Connecting to the Network
Figure 3-7
Figure 3-8
Use software commands to choose a specific port and the line termination on that port. For information
Note
about software commands, see the Cisco AS5350XM and Cisco AS5400XM Universal Gateways
Software Configuration Guide. This document is available on Cisco.com. (See the
Documentation" section on page
Note If you choose a port with 75-ohm input impedance, use an RJ-45-to-75-ohm coaxial cable adapter and
plug it into that port.
Cisco AS5350XM Universal Gateway Chassis Installation Guide
3-8
Connecting a 2-Port or 4-Port DFC to an RJ-45 (T1) Jack
Straight-through
RJ-45-to-RJ-45 cable
Connecting an 8-Port DFC to an RJ-45 (T1) Jack
T1/E1 8 PRI
connector
Straight-through
RJ-45-to-RJ-45 cable
xiv.)
Chapter 3 Installing the Cisco AS5350XM Universal Gateway
RJ-45 jack
RJ-45 jack
"Obtaining
OL-6417-02