Cisco AS5350XM Installation Manual page 41

Chapter 3 Installing the Cisco AS5350XM Universal Gateway
Connect each E1/PRI port to an RJ-45 jack with a straight-through RJ-45 to RJ-45 cable. (See
•
Figure 3-9
The E1 interface card may only be installed in an ACA-permitted customer equipment or a Data
Warning
Terminal Equipment (DTE) that is exempted from ACA's permit requirements. The customer equipment
must only be housed in a cabinet that has screw-down lids to stop user access to overvoltages on the
customer equipment. The customer equipment has circuitry that may have telecommunications
network voltages on them. Statement 90
Figure 3-9
OL-6417-02
and Figure 3-10.)
Connecting a 2-Port or 4-Port DFC to an RJ-45 Jack
Cisco AS5350XM Universal Gateway Chassis Installation Guide
E1 cable
Connecting to the Network
RJ-45 jack
3-9