Connecting To A Virtual Private Network (Vpn); Connecting To A Vpn Manually - Cisco SPA525G User Manual

Using Advanced Phone Features
Configuring Privacy and Security Features
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Press Set.

Connecting to a Virtual Private Network (VPN)

Your phone administrator can set up a VPN that allows you to use your phone at an
offsite location to securely connect to the company phone network over the
Internet. You must get from your phone administrator the IP address of the VPN,
your username, and password.
To configure your phone for use with a VPN:
Press Setup.
Scroll to Network Configuration and press Select.
Scroll to VPN and press the Right Arrow key.
Enter the IP address of the VPN server provided by your phone administrator.
Press the Down Arrow key and enter your user name.
Press the Down Arrow key and enter your password.
Press the Down Arrow key and enter the tunnel group (typically not required).
(Optional) If you want your phone to connect to the VPN every time it starts up (for
example, if you will always be using it at an offsite location), press the Down Arrow
key to the Connect on Bootup field, and press the Right Arrow key to toggle the
feature enabled (checked) or disabled (unchecked).
Press Set.

Connecting to a VPN Manually

To connect to the VPN manually:
Press Setup.
Scroll to Network Configuration and press Select.
Scroll to VPN and press the Right Arrow key to display VPN Settings.
4
58