Quick start guide to your IP phone IP Phone Model SPA 525G/ SPA 525G2 Note The features available on your phone depend on the type of system to which your phone is connected. Contact your system administrator if you have questions about phone features.
Installation Caution Do not insert a telephone line cord into the port marked ‘AUX’ (1). Step 1 Step 3 Turn the phone over to expose the Optional - Connect the desk stand by ports on the back of the unit. lining up the tabs on the desk stand with the slots on the back of the Step 2...
Your phone has a built-in wireless adapter. You must unplug the Ethernet connection before configuring WiFi. See the Cisco Small Business IP Phone SPA 525G/525G2 (SIP) User Guide or the Cisco Unified Communications Manager Express for the Cisco Small Business IP Phone 525G/525G2 User Guide for more information.
Phone hardware features Refer to the following table for identifi cation of your IP phone’s hardware features. Phone feature Description Receiver Pick up to place or answer a call. Speaker for phone. Speaker Message Waiting When lit red, you have a new voicemail message. When lit fl ashing red, you have an incoming call Indicator or the phone’s fi rmware is being updated.
USB 2.0 host port Accepts USB memory device to play MP3 fi les on the phone or to upload security certifi cates for (Shown below) wireless authentication. Can also be used to charge devices (Cisco SPA 525G2 model). Headset port Accepts wired headsets.
Soft key buttons The soft key buttons on your phone display may vary depending on your phone system set-up. Press the right navigation button or the ‘More’ soft key button to view additional soft key buttons. Following this, a partial listing of soft key buttons that may be available on your phone, depending on your phone system.
Using your IP phone Using keypad shortcuts Use the keypad to enter the number of the menu or sub-menu item. For example, to reach the Call History menu, press the Setup button and enter ‘2’. Menus and options may vary depending on the phone system.
Redialling Depending on your phone model and phone system set-up, use one of the following methods: • Press ‘Redial’ to dial the last number that you called. • To redial a recently called number, press ‘Redial’, select the number from the list and then press ‘Dial’...