Using The Paging Feature; Paging Another Phone; Paging A Group Of Phones; Configuring Auto Answer - Cisco SPA525G User Manual

Using Advanced Phone Features

Using the Paging Feature

Using the Paging Feature
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Your IP phone can automatically answer pages from other Cisco SPA phones in
the phone system. When your phone is paged, the phone emits a series of beeps,
and two-way audio is established between your phone and the phone that called
you. You do not have to accept the page.
This feature must be configured by your phone administrator.

Paging Another Phone

To page another phone, dial *96 plus the extension of the phone you are paging. If
the phone you are paging is not set up to auto answer pages, the call rings as
would a normal voice call.

Paging a Group of Phones

Your phone administrator can configure a group of phones that you can page
simultaneously. Each paging group has a number associated with it. Your
administrator must give you the phone numbers of the groups that are configured.
To page a group, dial *96 plus the number of the paging group.

Configuring Auto Answer

To configure your phone to auto answer pages:
Press Setup.
Scroll to User Preferences and press Select.
Select Call Preferences.
Scroll to Auto Answer Page. Press the Right Arrow key to toggle the feature on
(checked) or off (unchecked).
Press Set.
4
70