Bluetooth Profiles; Upgrading Firmware - Cisco SPA525G User Manual

Using the Web Configuration Utility

Upgrading Firmware

STEP 4
STEP 5
STEP 6
STEP 7

Upgrading Firmware

STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Click Search Bluetooth Devices. When found, your device appears in the Bluetooth
Device List.
Select the device.
Enter your PIN.
Click Submit All Changes.

Bluetooth Profiles

If you have both a headset and a Bluetooth-enabled phone paired with your
Cisco SPA525G2, the phone can only connect to one device at a time. If multiple
Bluetooth devices are in range of the IP phone, the order of the devices in the
Bluetooth Profiles list is used to determine which device the phone will attempt to
pair with first. The device with a higher order priority number is attempted first.
Use the arrow keys to move devices up and down in priority order.
Choose yes or no in the Connect Automatically column to determine if the phone
will attempt to connect automatically when it detects that Bluetooth device. You
can also select a device and click Remove to remove a device from the list.
If you are using your phone with an Internet Telephony Service Provider, do not
upgrade your phone firmware without consulting your phone system administrator
or service provider. Often the administrator or service provider automatically
upgrades your phone remotely as needed.
Before upgrading your firmware, download the latest version from
www.cisco.com/go/smallbiz
To upload the firmware from the PC to the phone:
Log in to the phone web user interface.
Choose the Firmware Upgrade tab.
Click Firmware Upgrade Window.
Browse to select the firmware file from your PC.
to a convenient folder on your PC and unzip the file.
5
http://
94